Plant fibre floorcoverings
Information specific to our plant fibre floorcoverings
Here we have collated information for our plant fibre collection, this information differs from our wool rich carpets.
Colour Match
Natural Base flooring is made from natural products and may therefore contain randomly blended coloured plant fibres; this is an inherent characteristic of the yarn, which is considered an attractive and intentional feature of the product. As with all textile products colour reproduction may vary between dye batches.
Fitting Instructions
We strongly advise that your Natural Base flooring is fitted by a professional trained plant fibre flooring fitter. These type of products differ significantly in the method by which they need to be fitted and as such require specialist knowledge to ensure that they stay looking great. Before the floorcovering is installed it should be acclimatised in the area in which it is to be laid for at least 48 hours. Our Natural Base range is not recommended for use on stairs.
All the floorcoverings within Natural Base range should be installed using a double stick system with short pin gripper around the edge to give a tidy finish. The recommended underlay is a flat foam rubber similar to Interfloor Technics 5 or 6. A tackifier adhesive should be used between the subfloor and underlay and a permanent adhesive between the underlay and floorcovering.
Stain Protection
We always recommend that Natural Base products are treated with Intec stain protection solution. The environmentally friendly treatment is applied at the point your floorcovering is cut from the roll and will not affect the performance of your floorcovering. Spillages should be blotted up quickly with kitchen paper. Ask your Natural Base retailer for more details.
For further information please contact Sue Cooke on 01562 635446 or e-mail technical enquiries.
Here we have collated information for our plant fibre collection, this information differs from our wool rich carpets.
Natural Base
Due to the living nature of the products within the Natural Base collection, great care should be taken from installation through to its maintenance.Colour Match
Natural Base flooring is made from natural products and may therefore contain randomly blended coloured plant fibres; this is an inherent characteristic of the yarn, which is considered an attractive and intentional feature of the product. As with all textile products colour reproduction may vary between dye batches.
Fitting Instructions
We strongly advise that your Natural Base flooring is fitted by a professional trained plant fibre flooring fitter. These type of products differ significantly in the method by which they need to be fitted and as such require specialist knowledge to ensure that they stay looking great. Before the floorcovering is installed it should be acclimatised in the area in which it is to be laid for at least 48 hours. Our Natural Base range is not recommended for use on stairs.
All the floorcoverings within Natural Base range should be installed using a double stick system with short pin gripper around the edge to give a tidy finish. The recommended underlay is a flat foam rubber similar to Interfloor Technics 5 or 6. A tackifier adhesive should be used between the subfloor and underlay and a permanent adhesive between the underlay and floorcovering.
Stain Protection
We always recommend that Natural Base products are treated with Intec stain protection solution. The environmentally friendly treatment is applied at the point your floorcovering is cut from the roll and will not affect the performance of your floorcovering. Spillages should be blotted up quickly with kitchen paper. Ask your Natural Base retailer for more details.
For further information please contact Sue Cooke on 01562 635446 or e-mail technical enquiries.